A clothes dryer is one of those appliances you don't think about until it stops working.
With good care, many dryers last 10 to 15 years, and they rarely fail without warning. Most give you signs that something's wrong well before they stop. Knowing what to look for can save you a breakdown, and often the dryer itself.
Here are five signs your dryer needs attention.
1. Clothes take much longer to dry
If a load that used to take 45 minutes now takes over an hour, something isn't right. It's one of the most common signs of a fault.
Likely causes:
- A blocked lint filter
- Restricted airflow or venting
- A faulty heating element
- A failing thermostat
- Worn sensors on sensor-dry models
As well as wasting power, it puts extra strain on the dryer.
Tip: clean the lint filter after every load and make sure external vents are clear.
2. Unusual noises
Every dryer makes some noise, but loud or new sounds are worth paying attention to. Listen for:
- Squealing
- Grinding
- Scraping
- Thumping
- Rattling
These usually point to worn drum rollers, bearings, belts or other moving parts. Catching them early often prevents more expensive damage.
3. It isn't heating properly
If the dryer runs but your clothes come out damp, the heating system may not be working as it should.
Common causes:
- A failed heating element
- A faulty thermostat
- A blown thermal fuse
- An electrical fault
Running a dryer that isn't heating properly uses power without getting the job done.
4. Burning smells or too much heat
Never ignore a burning smell. It can be caused by:
- Lint build-up
- Overheating parts
- An electrical fault
- A worn drive belt
- Motor problems
The same goes if the outside of the dryer gets unusually hot.
Safety first: stop using the dryer if there's a burning smell that doesn't go away or any sign of overheating, and have it checked.
5. It stops mid-cycle
If the dryer starts but shuts off before the cycle finishes, the cause could be:
- The overheating protection cutting in
- Faulty moisture sensors
- Motor problems
- A control board fault
- An electrical issue
Repeated shutdowns usually mean a fault that should be diagnosed before you keep using it.
Can it be repaired?
Usually, yes, especially if the problem is caught early. Parts like these can often be replaced without buying a new dryer:
- Heating elements
- Belts
- Drum rollers and wheels
- Thermostats
- Door switches
- Sensors
A technician can inspect the dryer and tell you whether a repair is the most economical option.
When is it time to replace it?
Replacement may be worth considering if:
- The dryer is well over 10 to 15 years old
- Several major parts have failed
- Replacement parts are no longer available
- The repair would cost close to a new dryer
- It keeps breaking down despite earlier repairs
We'll always give you a straight answer. If a repair isn't worth it, we'll say so. If it is, we'll explain the options so you can decide.
Keep it running longer
A little routine care goes a long way:
- Clean the lint filter after every load.
- Keep the air vents clear.
- Don't overload the drum.
- Vacuum around and behind the dryer regularly.
- Get unusual noises or slow drying checked early.
It keeps the dryer efficient, uses less power and helps prevent costly breakdowns. There are more tips in our appliance care and maintenance guide.
Need your dryer repaired?
If your dryer is slow, noisy or just not performing like it used to, we can help. Our technicians repair most major brands using manufacturer-approved methods and quality parts, in or out of warranty. We'll find the problem, explain your options and get your laundry back on track.
Book a dryer repair online, call us on (07) 4632 8155, or order the part online if you know what you need.